One of the most important obligations you have as a diver is to properly care for your diving equipment from Diving Shop Sydney. Good post-dive equipment serves to prolong the service life of your premium gear and reduces the danger of medical problems and gear-related concerns the very next time you dive.
Keep in mind that your Diving Shop Sydney diving gear is your survival beneath. Maintaining it in excellent operating order must be a primary concern for every diver.
For this reason, you must understand how to care for your scuba diving equipment. Here’s an outline of how to manage the key parts of diving equipment after you’ve done your plunge from Diving Shop Sydney.
BCD
You must properly clean your BCD after the dive, as you do with all of your equipment. However, after cleaning the outside, don’t fail to rinse the interior of the BCD. Saltwater enters the BCD through the dump valves and low-pressure inflator during a dive, therefore it’s critical to drain it afterwards.
To accomplish this, use the low-pressure inflator to discharge fresh water into the BCD. When you’ve got water in your BCD, inflate it orally and shake it to let the water touch each section of the jacket.
After thoroughly rinsing your BCD, you may drain the water using the dump valves. It’s better to only partly inflate your BCD and store it in a cool, dry location once you’re set to keep it.
Regulator
Additionally, after a dive, you need to clean your regulator in freshwater. When doing so, ensure your regulator’s dust cap is firmly fastened and that the dust cap itself is dry. Water should not reach the regulator’s first stage since it might harm the internal components.
After a dive, clean your regulator under running water or soak it in fresh water. When you’re done cleaning your regulator, hang it up to dry fully prior to storing it. Regardless of whether you get a regulator from Diving Shop Sydney, you must still maintain your preferred regulator.
Mask, Fins, and Snorkel
It’s simple to care for your mask, fins, and snorkel. They should be cleaned in fresh water and properly dried before being kept, just like anything else. To avoid scratches on the lenses of your mask, keep it in a sturdy case.
It is critical not to rest your finds on their points when keeping them since this might break the blade and limit the efficacy of your fins. Instead, fold them up or hang them by the strap. When you purchase one from Diving Shop Sydney, they will instruct you on how to keep it.
Wetsuit, Booties, and Gloves
Wash these products inside and out with a neoprene-specific soap or disinfectant. After washing, neoprene products should be hung up to dry. If you store a wetsuit without allowing it to completely dry, mildew or other microorganisms may grow.
Use wetsuit hangers developed exclusively for wetsuits when hanging your wetsuit. Using a wire hanger could cause creases and damage to your suit. The broader the hanger, in general, the better.
Cylinder
It’s not like all divers use their own cylinders, however, when you do, don’t forget to maintain them after each dive. Also, to minimise salt accumulation and corrosion, rinse cylinders in freshwater. When keeping your cylinder, keep it horizontal to avoid it from dropping.
It is also critical to avoid storing your cylinder totally vacant or totally full. Toxins can enter the cylinder without a little air, and too much air can cause it to shatter over time.
Accessories
Cleaning needs vary depending on the accessory, such as cameras, spotlights, knives, and diving watches. However, following your dive, all of this gear should be carefully cleaned and let to dry completely before storage.
The Importance of Cleaning Your Gear
This blog should have underlined the significance of properly handling your diving equipment and offered some guidance on how to start an after-dive maintenance regimen. It’s also worth noting that having a thorough maintenance regimen does not prevent you from examining your gear on a regular basis.
It is still necessary to test your equipment before each dive to ensure that it is fully operational. Cleaning and inspecting your equipment on a regular basis can guarantee that it is still working correctly and keeps you safe underwater.